公司总机：0755-29376869
0755-82595119
市场部直线：0755-29376869-108
客服部直线：0755-29376869-102
传 真：0755-82597252
邮 编：518109
邮 箱：info@kingfeal.com
地 址：深圳市龙华区大浪华霆路
228号
产品中心
当前位置： 首页 > 产品展示 > PEM压铆螺钉
产品名称：PEM压铆螺钉
产品名称：PEM压铆螺钉、压铆螺丝
产品型号：FH, FHS, FHA, TFH, TFHS, HFH, HFHS, HFHB, TPS、FH4...
产品特点：装入圆形孔内，采用冲压铆接，能使其头部紧密铆接在厚度为0.5以上的薄板中。
螺纹规格：#2到#3/8；M3到M10。
PEM self-clinching concealed-head studs install permanently in steel or aluminum sheets as this as .062" / 1.6mm to provide strong and reusable threads for mating hardware in a wide range of thin-metal assembly applications.
Download Bulletin CH
Available in steel, aluminum and stainless steel, PEM standard flush-head studs are designed to be installed in sheets as thin as .040" / 1 mm.
Flush, low-displacement head studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge. Download Bulletin FH
Heavy Duty studs are designed with an enlarged head diameter which projects above the sheet metal and provides maximum pull through in sheets as thin as .040" / 1mm
Heavy duty high tensile strength studs are manufactured for the most demanding applications from medium carbon alloy steel, then heat-treated to high strength and hardness qualities. Download Bulletin FH
Thin sheet studs are for sheets as thin as .020 inches / 0.51 mm. They may also be used in thicker sheets where flush head studs are not required. TFH studs are installed in the sheets in the same manner as flush-head studs; however different punches and anvils are required.
Flush-head pilot pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy.
One of the very basics of self-clinching is that the fastener must always be harder than the host sheet to ensure proper and permanent installation. Threaded types FH4, FHP and unthreaded type TP4 are specifically designed for installation into stainless steel sheets as thin as .040'" / 1 mm.
Type MPP, self-clinching micro pins are ideal for today's compact electronic assemblies. They can be installed into a variety of sheet materials up to HRB 92 / HB 195 in hardness and they offer excellent corrosion resistance.